Hot-mixed lime mortar
Hot-mixed Lime Mortar, published by Historic Environment Scotland in April 2015 states: ‘Hot-mixed lime mortars are prepared by adding specific measures of quicklime to aggregate and water and mixing together to form a mortar. The quicklime reacts with water generating heat, and simultaneously binds together with the sand or aggregate to produce a mortar. This mortar is ‘hot’, from the reaction, and (can) be used while still warm (for certain works) or stored (‘banked’) for later use. This differs from other methods of preparing lime mortars where slaked lime (lime that has already reacted with water to form a putty or a dry hydrate powder) is added to aggregate to form a mortar. Hot-mixed lime mortars have some different properties to mortars prepared from mature lime putty or bagged dry hydrate powdered lime due to the effect of the heat of the reaction, and the high alkalinity of the lime, on the aggregates and other components in the mix.’
[edit] Related articles on Designing Buildings
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
Leaders in Learning for Practice Network
Call for conservation leaders in learning to register interest in new network.
The importance of early engagement
Construction lessons from the Trillium HealthWorks Experience Centre.
Mayors are to be given planning call in powers
Mayors across England will be able to make the most important planning decisions.
The Master Builder: William Butterfield and his times. Book review.
Why construction can't afford to ignore the skills gap.
Building Safety Regulator, 19 August
Gill Kernick appointed Independent Chair of Residents’ Panel.
Connecting knowledge, technology and conservation
Building competence for the future of built heritage.
Building Regulations and Building Safety Act
CIOB publishes free advice for non-domestic clients.
Building Safety Newsletter from MHCLG.
An extraordinary record of steel engineering worldwide.
Households living near new pylons to save on bills.
ECA warns growth must not outpace grid capacity or skills.